Stainless steel 304 Cold Drawn ERW Tube Supplier in India

Cold Drawn Tubes

Cold Drawn Seamless (CDS) Tubing is a cold-drawn 1018/1026 steel tube with uniform tolerances, improved machinability, and higher strength and tolerances than hot-rolled counterparts. Cold drawing, which is made from hot rolled 1026, improves the physical qualities of the tube and offers better tolerances and lower machining allowances than hot finish seamless.

Cold Drawn Seamless (CDS) seamless tubes and pipes are made by piercing hot billets and then rolling them to minimize their diameter and length. This material is then run through a die and over a mandrel plug to generate a precise size and gauge, which is the heart of the cold drawing process.

xz

We can provide cold drawn hydraulic tube in basically any size

Cold drawn mechanical tubing is frequently utilized in the manufacture of structural components, tools, and mechanical parts. CDS steel tubing has bigger moments of inertia and section modulus than round pipes, have greater torsion resistance, saves materials, and enhances efficiency. They can be processed directly in factories or mechanical processing plants without undergoing any thorough processing. Utilise, lessen effort, increase work efficiency, and be adored by terminal demand.

When compared to hot finish seamless goods, cold drew seamless steel tube has a better uniformed OD and ID, improved machinability, increased strength, and tighter tolerances.

Specification of Cold Drawn Tubes

Wall Thickness Sizes ( O.D.)
.010 1/16″ , 1/8″ , 3/16″
.020 1/16″ , 1/8″ , 3/16″ , 1/4″ , 5/16″ , 3/8″
.012 1/8″
.016 1/8″ , 3/16″
.028 1/8″ , 3/16″ , 1/4″ , 5/16″ , 3/8″ , 1/2″ , 3/4″ , 1″ , 1 1/2″ , 2″
.035 1/8″ , 3/16″ , 1/4″ , 5/16″ , 3/8″ , 7/16″ , 1/2″ , 16″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 2″ , 2 1/4″
.049 3/16″ , 1/4″ , 5/16″ , 3/8″ , 1/2″ , 16″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/8″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 2″ , 2 1/4″
.065 1/4″ , 5/16″ , 3/8″ , 1/2″ , 16″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 1 3/4″ , 2″ , 2 1/2″ , 3″
.083 1/4″ , 3/8″ , 1/2″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 1 5/8″ , 1 7/8″ , 2″ , 2 1/2″ ,3″
.095 1/2″ , 5/8″ , 1″ , 1 1/4″ , 1 1/2″ , 2″
.109 1/2″ , 3/4″ , 1″ , 1 1/4″ , 1 1/2″ , 2″
.120 1/2″ , 5/8″ , 3/4″ , 7/8″ , 1″ , 1 1/4″ , 1 1/2″ , 2″ , 2 1/4″ , 2 1/2″ , 3″
.125 3/4″ , 1″ , 1 1/4″ , 1 1/2″ , 2″ , 3″ , 3 1/4″
.134 1″
.250 3″
.375 3 1/2″

Largest stockist of small-quantity cds steel tubing

Cold drawn hydraulic tube Types

Cold drawn steel tube

Cold drawn steel tube

Cold drawn welded tubes

Cold drawn welded tubes

Cold drawn seamless steel tube

Cold drawn seamless steel tube

Cold drawn hydraulic tube

Cold drawn hydraulic tube

Cds steel tubing

Cds steel tubing

Cold drawn seamless stainless steel tube

Cold drawn seamless stainless steel tube

SS 304 cold drawn ERW Tube Condition

Term Symbol Explanation
Cold-finished/hard(cold-finished as-drawn) BK No heat treatment after the last cold-forming process. The tubes therefore have only low deformability.
Cold-finished/soft(lightly cold-worked) BKW After the last heat treatment there is a light finishing pass (cold drawing) With proper subsequent processing, the tube can be cold-formed (e.g. bent, expanded) within certain limits.
Annealed GBK After the final cold-forming process the tubes are annealed in a controlled atmosphere or under vacuum.
Normalized NBK The tubes are annealed above the upper transformation point in a controlled atmosphere or under vacuum.
Contact us today to buy cold drawn seamless stainless steel tube at 10% discounted rate

Chemical composition of cold drawn welded tubes

Grade C Mn Si P S Cr Mo Ni N Ti Fe
304 min. 18.0 8.0
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10
304L min. 18.0 8.0
max. 0.030 2.0 0.75 0.045 0.030 20.0 12.0 0.10
304H min. 0.04 18.0 8.0
max. 0.010 2.0 0.75 0.045 0.030 20.0 10.5
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 26.00 0.10 max 19.00 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 26.00 0.75 max 19.00 21.00 53.095 min
SS 310H 0.04 0.10 2 max 1.00 max 0.045 max 0.030 max 24.00 26.00 19.00 21.00 53.885 min
316 min. 16.0 2.03.0 10.0
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0
316L min. 16.0 2.03.0 10.0
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0
316TI 0.08 max 10.00 14.00 2.0 max 0.045 max 0.030 max 16.00 18.00 0.75 max 2.00 3.00
317 0.08 max 2 max 1 max 0.045 max 0.030 max 18.00 20.00 3.00 4.00 57.845 min
SS 317L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 20.00 3.00 4.00 11.00 15.00 57.89 min
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 19.00 9.00 12.00 0.10 max 5(C+N) 0.70 max
SS 321H 0.04 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 19.00 9.00 12.00 0.10 max 4(C+N) 0.70 max
347/ 347H 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 20.00 9.0013.00
410 min. 11.5
max. 0.15 1.0 1.00 0.040 0.030 13.5 0.75
446 min. 23.0 0.10
max. 0.2 1.5 0.75 0.040 0.030 30.0 0.50 0.25
904L min. 19.0 4.00 23.00 0.10
max. 0.20 2.00 1.00 0.045 0.035 23.0 5.00 28.00 0.25
Get in touch for assistance for buying cold drawn mechanical tubing widely used in Chemical Industry

Mechanical properties of cold drawn seamless steel tube

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
304/ 304L 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
304H 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 40 %
310 / 310S / 310H 7.9 g/cm3 1402 °C (2555 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 40 %
306/ 316H 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
316L 8.0 g/cm3 1399 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
317 7.9 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
321 8.0 g/cm3 1457 °C (2650 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
347 8.0 g/cm3 1454 °C (2650 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
904L 7.95 g/cm3 1350 °C (2460 °F) Psi 71000 , MPa 490 Psi 32000 , MPa 220 35 %

Application of cold drawn mechanical tubing

  • Construction and architecture
  • Industrial machinery
  • Power generation
  • Textile industry
  • Brewing equipment

Packaging of cold drawn seamless steel tube

Proper packaging of steel tubes is contingent on their specific type and dimensions. We have established packaging protocols for the most commonly used pipe varieties, yet additional care should be taken during sealift handling and transportation to avoid potential damages from movement.

Frequently asked questions