Reliable alloy 400 trim ball valve Manufacturer in India

Monel ball valve

It becomes evident that the Monel Ball Valves are as industrial valves that are composed of Monel alloy. The Monel 400 Ball Valves are resistant to corrosion because the material used is nickel and copper based – solid solution alloy. Copper brings improvement to the strength as well as the corrosion resistance of nickel alloy to an upper level. Leading suppliers of Monel 400 Ball Valve provide valves for usage in various processes occurring in hydrochloric acids, brine, alkaline solution, reducing acids and the like. Fit-Lok is leading Monel ball valve manufacturer in India in wide range of sizes and pressure rating and we are supplying it in UAE, Spain and Nigeria.

Fit-lok is reliable stockholder and distributor of monel 400 ball valve in Mumbai and exporting it worldwide. Despite the fact that the Alloy 400 Flow Control Ball Valves can control the degree of flow, this can only be done with approximate numbers. That is because these ball valves are not easily operated and managed, especially in the controlling process, because they need a very high torque in order to be opened and closed. The characteristics of the Monel K500 Ball Valve include extremely high resistance of products to corrosion and erosion as well as high strength. The Nickel Alloy 400 Compression Ball Valve is useful for combating seawater and high temperature steam applications.

Alloy 400 Hydraulic Ball Valve is a special industrial valves which has a part of controlling and managing the production of the fluid circulation in hydraulic systems. All it consists of is two ports; an inlet and an outlet and a ball which has a bore in it. The UNS N04400 High Pressure Ball Valve can be ideally used for the places where the connections in the piping system are at same pressure load. They can also make corresponding connections of the same pressure load or flange connection. The DIN 2.4360 Mini Ball Valve is ten to fifteen degree rotating valves and they are used to shut off a process connection in the pipework.

Check latest price list of uns n04400 instrumentation ball valve

Monel ball valve specification

Working Pressure Up to 6000 PSIG
End Connection Male to Female, Male and Female NPT, Socket Weld (SW) or Dual Ferrule Tube Connections, BSPT, Female to Female
Sizes 1/8 to 4”, Sizes available on request
Pressure rating 150#, 300#, 600#, 900#, 1500#

Monel instrumentation ball valve chemical composition

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min

Monel alloy Panel Mounted Ball Valve Mechanical properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %

Equivalent grade of Monel ball valves

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe

Pressure Rating Of Monel 400 ball valve

NPS PSIG
1/2 – 1-1/2 1000 PSIG (69 BARG)
2 800 PSIG (55 BARG)
3 600 PSIG (41 BARG)
4-5 500 PSIG (34 BARG)
6 300 PSIG (21 BARG)

Size Chart of Alloy K500 3 way ball valve

END CONNECTION SIZE ORIFICE A
(IN) (MM) (IN) (MM) (IN) (MM)
1/8 3.17 0.09 2.4 1.01 25.5
3/16 4.76 0.13 3.2 1.1 28
1/4 6.35 0.19 4.8 1.2 30
3/8 9.52 0.28 7.1 1.45 36.5
1/2 12.7 0.41 10.3 1.74 44.2
0.12 3 0.09 2.4 1.01 25.5
0.24 6 0.19 4.8 1.2 30
0.31 8 0.19 4.8 1.23 31.2
0.39 10 0.28 7.1 1.45 36.5
0.47 12 0.41 10.3 1.74 44.2